Taranis Cleanflight In-flight Adjustments (Voice Files)

While setting up Cleanflight adjustments on my old 9X transmitter, I had to limit the number of adjustment parameters I was using at any given time.  I was afraid if I set up too many parameters, I would forget which switch positions were which.  With the custom audio feedback from the Taranis, this is no longer a problem.

Here’s some .wav audio voice files I made for the Taranis.  There is a file for each current Cleanflight adjustment parameter, as well as a few other useful ones.
Taranis Cleanflight Ajustment WAVs (.zip)

For my setup, I wanted a pot on the TX to select from 11 inflight adjustment parameters.  Without the voice feedback it would be nearly impossible to determine which parameter I was adjusting.  I’ve only been using it for a day, and I’m not convinced it is the ideal setup, but here’s how I did it:

Setup logical switches, one for each parameter. I used this pattern, continued through L11:

taranis-cleanflight

Setup Special Functions:

taranis-cleanflight-adjustments

Then in cleanflight I used the receiver tab to find the center value when each track would play, and tried to center that value in the in-flight adjustments (the ranges only have a resolution of 25). Here’s my cli adjustments:

# adjrange
adjrange 0 0 2 900 1025 15 1
adjrange 1 0 2 1050 1125 16 1
adjrange 2 0 2 1175 1225 17 1
adjrange 3 0 2 1275 1325 18 1
adjrange 4 0 2 1375 1425 19 1
adjrange 5 0 2 1475 1525 20 1
adjrange 6 0 2 1575 1625 9 1
adjrange 7 0 2 1675 1725 10 1
adjrange 8 0 2 1775 1825 11 1
adjrange 9 0 2 1875 1925 13 1
adjrange 10 0 2 1975 2100 14 1
adjrange 11 0 0 900 900 0 0

For more detail on in-flight adjustments, check out this page:  https://github.com/cleanflight/cleanflight/blob/master/docs/Inflight%20Adjustments.md