The SP Racing F3 (Seriously Pro Racing F3 EVO) is the third flight controller designed specifically for Cleanflight. It is the only wallet-friendly FC that supports all the latest Cleanflight features in a standard 36x36mm mounting holes form-factor. With the new transponder feature, it is truly race-ready.
Purchasing SP Racing F3 boards directly from SeriouslyPro / SP Racing and official retailers like GenixRC helps fund Cleanflight software development, it’s the reason the Seriously Pro boards exist!
* Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
* MicroSD-Card socket for black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.
* Race transponder built in – just turn up at a race and have your lap times recorded.
* Features the latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology connected via the fast SPI bus.
* Wire up using using pin headers for all major connections for excellent crash-durability. Use either right-angled or straight pin-headers.
* No compromise I/O. Use all the features all the time; e.g. Connect your USB + OSD + SmartPort + SBus + LED Strip + Battery Monitoring + 8 motors – all at the same time!
* 8 PWM output lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.
* Supports direct connection of SBus, SumH, SumD, Spektrum1024/2048, XBus receivers. No external inverters required (built-in). PWM 1 wire per channel receivers not supported.
* Supports direct connection of 3.3v Spektrum Satellite receivers via 3 pin through-hole JST-ZH connector.
* 3 Serial Ports – NOT shared with the USB socket.
* Micro USB socket.
* Dedicated output for programmable LEDs – great for orientation, racing and night flying. (Currently mutually exclusive with the Transponder).
* Dedicated I2C port for connection of OLED display without needing flight battery.
* Battery monitoring for voltage and current.
* RSSI monitoring (analog or PWM).
* Buzzer port for audible warnings and notifications.
* Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
* Symmetrical design for a super tidy wiring.
* JST-SH sockets for I2C/UART2 and SWD. UART2 also available on through-holes.
* Flashing via USB or serial port.
* Stackable design – perfect for integrating with OSDs and power distribution boards.
* Standard 30.5mm mounting holes.
* LEDs for 3v, 5v and Status for easy diagnostics.
* Copper-etched Cleanflight logo.
* SP Racing F3 EVO flight controller including accelerometer, gyro, altitude and heading sensors (barometer and compass, 10DOF)
* 1x IR LED
* Pin headers (right-angled and straight, black)
* Special QR-Code to download your unique transponder code.
* JST-ZH connector for Spektrum satellite receivers.
* Cleanflight sticker (subject to availability)
See the manufacturer’s page for more information on this product: SP Racing F3 Evo details
We’ve had questions from potential buyers asking if this is a clone board. It is genuine, and we purchase these directly from SP Racing. -GenixRC